AHP FUZZY在残采工程方案优选中的应用

为探讨太白金矿回收原采场边部残余低品位矿体的方案，通过层次分析法（AHP）与模糊数学（FUZZY）理论，选取对残采工程影响较大的9个因素，建立优选模型。运用层次分析法确定了各评价指标的权重；采用模糊数学法分析计算各采矿方法的定性、定量指标，分别得到各评价指标的隶属度。最终计算出3种工程布置方案的综合优选度分别为68.1%、69.3%、58.1%，从而沿矿体走向双进路布置确定为最优开采方案。实践表明，采用该模型优选的工程布置方案具有一定的科学性、合理性，值得借鉴与推广。     

A small-scale silica gel-water adsorption system for domestic air conditioning and water heating by the recovery of solar energy

A small-scale silica gel-water adsorption system with modular adsorber, which utilizes solar energy to achieve the cogeneration of domestic air conditioning and water heating effect, is proposed and investigated in this paper. A heat recovery process between two adsorbers and a mass recovery process between two evaporators are adopted to improve the overall cooling and heating performance. First, the adsorption system is tested under different modes (different mass recovery, heat recovery, and cogeneration time) to determine the optimal operating conditions. Then, the cogeneration performance of domestic cooling and water heating effect is studied at different heat transfer fluid temperatures. The results show that the optimal time for cogeneration, mass recovery, and heat recovery are 600 s, 40 s, and 40 s, respectively. When the inlet temperature of hot water is around 85°C, the largest cooling power and heating power are 8.25 kW and 21.94 kW, respectively. Under the condition of cooling water temperature of 35°C, the obtained maximum COP_c, COP_h, and SCP of the system are 0.59, 1.39, and 184.5 W/kg, respectively.     

A Smart Flexible Solid State Photovoltaic Device with Interfacial Cooling Recovery Feature through Thermoreversible Polymer Gel Electrolyte

Quasi‐solid‐state dye‐sensitized solar cells (DSSCs) fabricated with lightweight flexible substrates have a great potential in wearable electronic devices for in situ powering. However, the poor lifespan of these DSSCs limits their practical application. Strong mechanical stresses involved in practical applications cause breakage of the electrode/electrolyte interface in the DSSCs greatly affecting their performance and lifetime. Here, a mechanically robust, low‐cost, long‐lasting, and environment‐friendly quasi‐solid‐state DSSC using a smart thermoreversible water‐based polymer gel electrolyte with self‐healing characteristics at a low temperature (below 0 °C) is demonstrated. When the performance of the flexible DSSC is hindered by strong mechanical stresses (i.e., from multiple bending/twisting/shrinking actions), a simple cooling treatment can regenerate the electrode/electrolyte interface and recover the performance close to the initial level. A performance recovery as high as 94% is proven possible even after 300 cycles of 90° bending. To the best of our knowledge, this is the first aqueous DSSC device with self‐healing behavior, using a smart thermoreversible polymer gel electrolyte, which provides a new perspective in flexible wearable solid‐state photovoltaic devices.     

Exergy analysis of the diesel pre-reforming solid oxide fuel cell system with anode off-gas recycling in the SchIBZ project. Part I: Modeling and validation

Solid oxide fuel cell (SOFC) systems with anode off-gas recirculation (AGR) and diesel pre-reforming are advantageous because they can operate with the current fuel infrastructure. In the SchIBZ-project, the prototype of such a SOFC system for maritime applications has already been commissioned. In this first paper, we model the system devices to conduct an exergy analysis of this real SOFC plant and validate them with experimental values from experiments in laboratory scale. The results of our simulation agree well with the experimental values. The calculations with the validated results may be closer to the real thermodynamic behavior of such system components than previous literature.     

航空发动机进气总温传感器测温误差研究

航空发动机进口总温测量的准确性是优化发动机控制率、保障发动机飞行安全的关键因素之一。针对影响传感器测量准确性的响应时间、恢复系数，通过空气动力学和热力学理论，分析出具体的影响因素，设计了多种结构模型，并通过热风洞试验、FloEFD软件建模和热流体仿真，从材料及结构上系统地提出了优化途径和改善办法并进行了验证，尤其是分析了双余度传感器的响应一致性误差并提出改善方法。研究结果为同类传感器的设计提供了参考和借鉴。     

Effect of Nanoparticles on Viscosity and Interfacial Tension of Aqueous Surfactant Solutions at High Salinity and High Temperature

Surfactant flooding has widely been used as one of the chemically enhanced oil recovery (EOR) techniques. Surfactants majorly influence the interfacial tension, γ, between oil and brine phase and control capillary number and relative permeability behavior and, thus, influence ultimate recovery. Additives, such as nanoparticles, are known to affect surfactant properties and are regarded as promising EOR agents. However, their detailed interactions with surfactants are not well understood. Thus, in this work, we examined the influence of silica nanoparticles on the ability of surfactants to lower γ and to increase viscosity at various temperatures and salinities. Results show that the presence of nanoparticles decreased γ between n-decane and various surfactant formulations by up to 20%. It was found that γ of nanoparticles–surfactant solutions passed through a minimum at 35 °C when salt was added. Furthermore, the viscosity of cationic surfactant solutions increased at specific salt (1.5 wt.%) and nanoparticle (0.05 wt.%) concentrations. Results illustrate that selected nanoparticles–surfactant formulations appear very promising for EOR as they can lower brine/n-decane interfacial tension and act as viscosity modifiers of the injected fluids.     

铋精矿加压氧化氨浸高效分离铜、硫和铋

针对湖南柿竹园铋精矿火法冶炼过程中存在的成本高、低浓度SO₂和散烟排放污染环境、有价金属综合回收率低等问题, 以柿竹园铋精矿为原料, 提出了加压氧化氨浸分离铋与铜、硫的新工艺, 研究了氨水加入量、浸出温度、浸出时间、浸出压力及浸出液固比等因素对铜、硫、铋浸出率的影响。在氨水用量1.8 mL/g_铋精矿、液固比4∶1、釜压2.8 MPa、浸出温度160 ℃、浸出时间5 h、搅拌速度600 r/min的优化工艺条件下, 铜、硫浸出率分别达93.57%和92.87%, 铋不浸出并以氧化铋形态全部入渣, 实现了铜、硫与铋的高效分离。     

Ethanol absorption from CO2 using solutions of glycerol and glycols

CO₂ stripping during fermentation is a possible way of increasing the production of ethanol in distilleries. Ethanol, water, and carbon dioxide are the main compounds in the exiting gas mixture. To date, few studies have proposed the use of absorption to recover ethanol from this mixture or have considered different absorbents for this purpose. This work evaluates different absorbent solutions used to recover ethanol vapor from CO₂ gas. Glycols and glycerol can provide easier separation of ethanol than water, with lower distillation energy demand. A statistical experimental design was used to compare the mass transfers of ethanol from the gas phase to the liquid phase, using solutions of glycerol, ethylene glycol, and diethylene glycol. High concentrations of these substances did not favor the absorption of ethanol. The best results were achieved with 25% absorbent solutions, which offered better options than water for the recovery of ethanol from CO₂ gas in absorption columns and could increase the productivity of first generation bioethanol production.     

旋转式采煤工艺在煤矿生产中的应用

采煤工艺作为煤矿正常生产的核心,直接关系到综采作业的效率、煤炭回采率和综采作业的安全性,随着对综采作业要求的不断提高,旋转式采煤工艺在煤矿井下的应用范围也不断扩大。以黄家沟煤业1205综采作业面为分析对象,对旋转式采煤工艺在井下的应用情况进行了研究,为优化综采方法、提升综采作业效率和煤炭回采率奠定基础。